High-quality, tapered roller bearing is designed for high-speed use. Replacement part uses industry-standard number.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, were going to review part number LM67048. This is the Axle Tek Trailer Wheel Bearing. This is an outer wheel bearing, and most replacement wheel bearings are high-quality, tapered-roller bearings designed for high speed use. All bearings will have an industry standard number stamped on them regardless of the brand. To get the correct bearing for your trailer, if you look on the inner ring, usually right there will be listed the part number In this case, for this one would be LM67048. Now, yours might have a different number depending on the brand you have.
What you need to do is just get the part number, give to us, and well be able to cross reference it to the correct bearing you would need. If you dont have the bearing number, the other thing you would have to do would be to measure the inner diameter. Thats the critical measurement of the bearing that fits on the spindle, and what you need to use would be a digital caliper to get a correct measurement because it is measured in thousands of an inch, so a ruler or a tape measure wouldnt work. In this case, if we measure the inner diameter of this bearing, it would measure 1.250. Now, these bearings will consist of three pieces.
It will basically have the inner ring or the cone which is this part right here, slides onto the spindle. It would be the tapered rollers right here, and then the rollers are held together with the cage or the roller retainer, which is the outer part right here. The lubrication on a wheel bearing is mainly wheel bearing grease, sometimes it would be oil. Now, there is one other piece that is required and that is the bearing race, and that is the part that would be pressed into the trailer hub that the bearing would sit into and rotate on. Now, the bearing race is sold separately.
For this one would be part number LM67010, and the critical measurement on that bearing race would be the outer diameter, which for that one would be 2.328 inches. That should do it for a review on part number LM67048.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
The bearings are working great in my trailer hubs, they were exactly what was ordered and delivery was on time
Great products and fast service. I ordered the bearings, race and seals. I ordered the wrong seals so haven't been able to complete. I must have misread something.
All the parts are items we keep on hand for maintenance of our two large trailers. etrailer has by far the best prices and with free shipping it does not pay us to source the parts locally.
I used this to replace a bearing on my Hudson HBC10 equipment trailer. The fit matches the old bearing and it's held up fine one year later.
All the bearings, races, and seals I have purchased from etrailer have been good quality and have never failed. I have used them in my travel trailer for many years.
etrailer and their customer service are the best i've seen, always there to talk you through the process to help ensure you're buying the right part and answer any questions. Great company!
I had a non standard axle, so had to call and verify bearings. Was very pleased with the service and that the person on the other end was very easy to understand. Shipment was fast and the parts fit. The price was very competitive.
product is great -- shipping/packaging could be better. Considering this is a wear item that gets replaced if there are surface defects that my create heat/friction, I don't see why these are just thrown in a box with a bit of paper, rather than wrapped in bubble-plastic or some other protective medium. other reviews have cited this, but apparently nothing has changed...
again etrailer always responsive to any questions or concerns just wish the bearings were made in USA. Not etrailer's fault
Everything fit properly and installation went smoothly. All needed parts were included, which was nice. The self-adjust worked well and break-in was quick.
I've only put about 1500 miles on the trailer since install, so I can't speak to longevity.
I'd buy them again though.
Good quality - matched fit - very happy with product. I also bought the outer race and seal to go with it as well as bearing cap for the axle. Impressed with the wide range of bearings eTrailer carries, making selection very easy.
All parts ordered to replace a complete brake system on a 25-year-old boat trailer fit perfectly. Ashly from etrailer was very knowledgeable regarding are needs. Thank you!
I replaced the bearings on my 5th wheel with these bearings, they fit as expected. After 7000 miles they are holding up well.
Great product, great service, especially Emily (thank you) Delivery on time and tracking great. Will only get etrailer from now on. Great catalog and how-to videos and info really helps. Highly recommend
Perfect fit for my Q633 hub. The associated grease seal was an SL150 which was difficult to find but the etrailer rep tracked it down and now my trailer is FINALLY back up and running! All my future business will go to etrailer.com.
Item as described. I have never replaced wheel bearings/seals, I always had someone else do it. This time I tried it on my own, and the parts I ordered/received fit as expected and all is well.
thank you etrailer!
Installed these bearings and races on my trailer after failure of the manufacture bearings failed because they saved money by not properly lubing at the factory. These have held up well putting on over 40,000 miles and proper lubrication.
PROS: The package came in on time.
CONS: Three of the four inner bearings were wrong. I went to O'reillys to get the correct parts. I cannot wait for etrailer to send me the right ones since I use this trailer for work. I am currently waiting for the shipping label to send back the wrong bearings and get refunded.
Removed trailer outer bearing to find a scored "race". Customer Service, extremely helpful and patient in trying to match up a few visible number on the old bearing and race to list of available options in etrailer's stock. Part was a perfect match, pressed in race. assembled hub and wheel, and back in business.
I have a late 70's boat trailer that needed new tires and wheel bearings... no kits available so I called etrailer and talked to Kayla. We figured out everything over the phone, Kayla got all the the correct bearings and seals to me fast! The tires I ordered where out of stock, but I was upgraded to the galvanized wheel for free!!!
Thanks Kayla!!!
So,
I needed new bearings and seals for a 1980 travel trailer wherein the axle, hubs and bearings had no markings. Diana (CSR) helped me work through through the options and was able to identify the correct parts. The bearings and seals came in and were a perfect fit. Everything was on time and intact. Very happy with my first etrailer buy.
I have a boat trailer that requires wheel bearings and seals periodically. It is 20 years old but I easily found replacements at etrailer.com. I bookmarked the parts so I can get them easily next time. Noticed that the original bearings were made in England, the recent ones are made in China and are of equivalent excellent quality. Delivery was prompt, packing very good.
Good retailer.
Not for marine applications. When I went to repack the bearing this spring they had completely fallen apart and rusted out.
Perfect fit. Fast shipping.
Even though Airstream no longer sourced replacement brake parts for my 2003 Airstream trailer, eTrailer had exact replacement brakes, drum/hubs, bearings and seals. Installation of the new parts was easy and quick.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.